Seestern 62MAS homage

So, in pursuit  of a diver (as a daily driver) and after (expectable) disappointment with the Addiesdives Willard and unexpected disappointment with the Rdunae 6105-8000 (failing), my next (perhaps predictable) move was to the try the homage of the Seiko 62 MAS. 

It looks and feels great. The dial is a combination of beauty in the right light, but sufficiently black for high contrast in low light. It is in fact exactly what made me buy the "Dress KX" in the first place. That was a "dress watch which was a homage to the SKX diver series" but instead the Seestern is a homage to the first Professional Diver watch by Seiko which still had elements of beauty making it a single watch for all occasions. Not too big, not too small, water resistant and functional. A "tool watch" which you'd be proud to wear to a function.

For those unfamiliar with the 62MAS I suggest this good over on another site. As is typical (and sad) few dimensions of value are given and very little time is spent looking at the watch in a 3 dimensional way. I hope to rectify that here.

The 62MAS is Seiko's first watch aimed at 'professional divers' and really started their trend of "machined billet" look and feel to their watch cases. Their next move was the (not so well known) 6105-8000 which led soon to the different case of the 8110 or the Willard. The Willard is a classic example of a watch which a movie and the internet has made more famous over time. The 62MAS not so much (unfortunately).

As far as lineage goes the directions started by 62MAS eventually led to the development SKX007 and to the more modern "Dress KX" series (which I've blogged about over here) that is now the base case used on most of the modern Seiko 5's. So as I've sold my SRPE61 but still have my SRPE63 I thought I'd show that beside the 62.

So you can see that the two are very similar watches, with the SRPE showing its "dress style" bezel and diver heritage in the very SKX style case. I think at this point I can say how the evolution of the Diver Dial in "House of Seiko" has shown improvement in legibility. Somehow the SKX (style) dial (on the right) is cleaner, less cluttered and very instantly visible as than the dial on the 62MAS.

Part of this legibility of the SRPE is that the actual dial area feels that big larger, but as you can't see it's in reality not much different. I believe that the presence of the chapter ring outside the dial, but inside the bezel and lack of the "rotating bezel dial" makes the face have more presence. Moving the markers a bit further out also helps this. The use of a clear Triangle at the 12, oblongs on the quaters (well the three has the day/date) and circular pips for the other markers instantly gives recogntion of orientation and thus reading that dial in lower light (like 2am with fading lume).

Watch thickness is almost identical, with only the crystal protruding a bit more to make the watches differ in thickness.

Crown position and curves of the body show the eventual trends that we saw first on the 6105-8000 and then Willard and then SKX007. The utility of drilled lugs is great, especially if you've ever had to hammer out a rusted spring bar (because diving will do that). Further the positioning of the drill holes (hence the actual spring bar position) makes  the 62MAS actually sit better. I mean who gives a fuck about "lug to lug" with relation to fitment when the place the strap pivots around is actually the important point.

The above shot also shows the relatively similar sizes and dimensions. Most of the specs for the 62MAS homage are pretty well known as they are published on the AliExpress sellers, however I may as well repeat the key points here:

Aspect	Dimension
lug to lug	48mm
spring bar to spring bar	43mm
Case diameter	37mm
bezel grip diameter	38.5mm
Case height	12mm
Total thickness	13.5mm

weight of the watches is often (confusingly) given with a strap or a bracelet ... myself I find knowing the watch weight itself to be important, so:

As you can see the Seestern 62MAS is a tad heavier, and annoyingly getting the weight (for comparison) of the actual  Seiko 62MAS is vexed.

To get a better look at the Willard and the 8000 case version please refer to my blog post here. The Seiko recreation of the 62MAS can be found here. 

However this bit from my above blog post about the Willards may be helpful directly.

That also features the SRPE and so its easier to make comparisons between those watches and the 62MAS homage.

Lastly I thought a quick look around in 3D on video would help:

In lower contrast lighting the dial is sufficiently black for good contrast.

Lastly the decoration on the caseback is a very nice touch. Well done and not uncomfortable on the wrist.

So that's about it ... I'll probably look at an Rdunae again when (if?) they come back in stock (perhaps...) and will be selling the Addiesdives Willard on eBay soon.

I'd call this "itch scratched".

:-)

PS today I was in a high end second hand jewellery shop and I was shown a genuine 62MAS with an 8001 case designation. As there was a scale nearby (on the counter) I weighed it and if I recall correctly it was 66g. So I weighed my Seestern and it showed 76g; thus it was lighter than my Seestern. What's worrying is that my scale shows my Seestern to be 66.2g (and all of this is watch only, without strap. Oh and the Bezel turned both ways.

also, I have added this additional set of notes related to it and the 6105-8xxx series of watches