Tuesday, 6 May 2008

Holga pinhole camera

Having recently started using 120 film, I wondered about making or buying a 120 pinhole camera. I did a little searching online and found that a basic wooden box camera was some hundreds of dollars. While its fashionable to be able to spend hundreds on toys I'm not so fashionable.

Just as I was resigned to making my own (perhaps from a junked folder) I came across the Holga pinhole on ebay. It arrived yesterday, and I've tested it and posted my first findings on the camera here. I'll probably post more as I find it.

The camera is a little bigger than I'd imagined, but considering that it does 6x9 and 6x12 I guess that I shouldn't have been surprised.

In terms of features, its surprisingly well appointed, with not only a lens cap (an able shutter in itself) and a shutter (seen to the left of the camera).

The camera back has the typical red window for determining the exposures (NB by reading the paper backing of 120 film) meaning that 220 is out of the question.

Also, the manual is not only unclear on this issue but entirely wrong. To use the 6x9 mask you need to put the switch up (with the arrow pointing to 16) and the number beside 12 visible. Then, you need to read the numbers as if you were taking 16 exposres (which you aren't) and use every second number. I tried evens first, and found that I had too much wasted leader and a ½ a frame when the film ran out. I'll use 1,3,5 ... next time.

As you can see from the paper tape here the locations for the window do not correspond with the correct location for 6x9, rather they're (as the numbers suggest) for 645 and 6x6. So to get (for example) 6x9 one will need to start at 1 and wind to 3 for the next frame. There will of course be double the border gap between frames :-)


The film access is by removing the entire back (no sophisticated hinged door here ;-)

These little latches double as the neck strap holder, and slide down (quite easilly) to allow the back door to fall off. The neck strap (when attached) prevents this (note to users).

You can also see the 'film advance' knob here. It has the feel of a cheap ratchet mechanism associated with a kids toy. I don't know how long it'll last, but hey, it only cost $50!


Another lovely touch on the camera is a bubble spirit level. This is a very handy feature, considering that you need to be using this on a tripod and as it also does 6x12 getting things level is really important for some landscape shots.

I'd reckon that when using the larger format that it might just be handy. The camera also comes with a shutter release cable as well as the masks for 6x9 or 6x12 (as you can see below).




Lastly, how well does it work? Well quite impressively in my opinion. Here's a few images from my first roll of film. I set exposure using my digital camera(at f5.6) , and calculated the required shift exposure by multiplying the time by 1000 (based on 210 which is near enough). I used ADOX CHM 120 film. This kitchen image in particular is actually the best tonal range (to match my scanner) I have ever had from the film.



the lounge room. Note again the exceptional range here. this is based on 15th @ f5.6 for the shadows, and even the full sunlight on the floor only just hit the edge of the film capacity! HDR pinhole!



Lastly I'd like to leave you with an 'eggs with oranges' comparison. This is an image which I've taken with at a different time also with my 10D. Comparison is fascinating. The lighting is (of course) different, but its from the same balcony of the same apartment.

First the overview



Then a 100% segment




Then the image that my 10D gets with a similar angle of view lens (a Tokina ATX at 15mm). This is taken on a tripod with mirror lock up. You'll notice that the composition is not exactly the same, this looks more to the right.



Then the 100% segment.



Conclusions:

For sure, the Holga image is grubby, but (of course) its largely diffraction limited. If I could use f64 on the 10D it wouldn't look so crash hot (let alone f135). So the Holga is damn fine value for money, and a welcome addition to my image kit!

8 comments:

Anonymous said...

i've been looking into getting one of these. I love your examples they are really nice shots! :)

Unknown said...

Hello, what numbers did you use to advance the 6x12?

obakesan said...

Hi

as I mention above I used the numbers beside the 12 window, on subsequent runs through I started on 1 and followed 3, 5, 7 ... sequence.

With the 6x12 (which I quite like too) I used the switch in the other position and used the same.

Hope that helps :-)

obakesan said...

in response to a few questions I thought I'd add a few points to clear up issues of film advance and exposure settings:

film advance

the 'red window' has a slider over it to move the place you view on the backing of the 120 roll film.
Remember that 120 roll film is just a continuous strip of film, frames are nothing more than where you expose and don't expose.
Typically exposed in 'sizes' such as:
645 which is 41.5mm long and therefore has 16 exposures per length.

6x6 which is 56mm long and thus has 12 exposures per length.

This explains the 16 and 12 indicator numbers beside the frame counting window.

When advancing the film, in both cases start at 1, then for 6x9 (which is really 56x84mm) you so use the 16 window and advance two frames each exposure
and for 6x12 you use the 12 window and advance two frames

exposure
the camera is rated at f133, the nearest f stop is is 128 (with 180 being the one after). This is 10 stops away from f5.6, since a stop is a doubling of exposure then we are doubling 2 times or 2^10th.
This is 1024 or to make life simple 1000. I found using my compact digital camera (a nikon coolpix 5000) at 5.6 and then using the shutter speed selected as my starting point (then multiply this by 1000) I get excellent results.

Anonymous said...

thanks a lot for posting your explanations to the film advance switch! It has been a great help-
.

Anonymous said...

In my opinion it is only 9 stops away (f5,6/f8/f11/f16/f22/f32/f45/f64/f90/f128).

So if 1 sec. is ok with f5,6
for f8 it shoud be 2 sec., for f11 - 4 sec., for f16 - 8 sec., for f22 - 16 sec.... etc.

So for f128 it should be 512 sec.

But according to the Schwarzschild effect the correct exposure time can be longer.

As you make your exposures longer than about 1 second or so, you may start noticing that the color balance and sensitivity of your film changes. This is called the reciprocity error, or SchwarzSchild effect. It basically means that if you make an exposure on, say, 1 second at f/8, this gives no longer the same exposure as a 2-second exposure on f/11, as it would be when you do short exposures (say, 1/500 sec or so). Film sensitivity drops for longer exposures, so in general you will need to expose the film longer (sometimes up to a factor of 2 or 3, or 1 to 1.6 stop) than what the light meter suggests.

That is why multiplying by 1000 seems to be ok.

Leonardo Régnier said...

Great pictures and a very nice explanation!

Leonardo (Brazil)
http://www.branconopreto.com

Leonardo Régnier said...

Great pictures and a very nice explanation!

Leonardo (Brazil)
http://www.branconopreto.com